This fast-drying topcoat provides a long-lasting finish with excellent gloss and color retention.Awlcraft Acrylic Topcoat 2000 is a two-part acrylic urethane topside finish that provides a long-lasting buffable finishwith outstanding gloss and color retention. This finish can be applied to properly prepared and primed fiberglass, wood,steel and aluminum substrates. Best results are achieved by following the complete Awlgrip system recommendations. Forspray application only.Key FeaturesPremium acrylic urethane topcoatFast drying acrylicSuperior flow-out and high glossLong lasting glossFast drying to reduce dust entrapmentRepairableGood color retentionEasy to apply buffable finish Can be buffed and polishedFor spray application onlyPhysical DataBase Formulation: Two- Component Acrylic UrethaneFinish: High-GlossVOC: 472 grams/liter or 3.9 lbs/gallonApplicationRecommended Application Method: Spray onlyNumber of coats recommended: 2-3Recommended Wet Film Thickness: 6-9 milsRecommended Dry Film Thickness: 2-3 milsApplication Temperature: minimum 55F (13C) and maximum 105F (41C)Primer Needed: 545 Epoxy Primer or 321 HS UndercoatCoverage: 573 Sq. Feet (53m2)Converter: Converter (G3010 )Cleaner: T0002 or T0003 ReducersDrying Times* (Hours)To Recoat: Spray 1-4 HoursTo Full cure : 14 days*The above dry times are minimums. May be recorded after the minimum time shown. There is no maximum dry time beforelaunching.More informationFor detailed application instructions and thinners see theAwlcraft 2000 Data Sheet. NOTE: Manufacturer data sheets are subject to revision. Linked data sheets are believed to beaccurate at the time of publication.For the complete range of available colors, see the